1075 EPOXY ALUMINUM TRIPOLYPHOSPHATE PRIMER

1075 EPOXY ALUMINUM TRIPOLYPHOSPHATE PRIMER

A two-pack, anti-corrosive paint based on epoxy resin and iron dioxide with aluminum tripolyphosphate non-pollution pigment.

Product Information

USES

Used for the steel structures of boottop above, storage tank, pipeline, plant facility.

CHARACTERISTICS

  1. Excellent resistance to sea water.
  2. Excellent rust preventive properties.
  3. Tough and hard film with very good adhesion.
  4. Excellent resistance to mechanical damage.
  5. Very good resistance to oils and chemicals.

FINISH: Flat

COLOR: Oxide Red, white or grey

1073 EPOXY CLEAR CEMENT PRIMER

A two-pack, clear primer based on epoxy resin and special hardener.

Product Information

USES

Used for cement walls, cement pipelines and cement products to resist water and alkalis.

CHARACTERISTICS

  1. Excellent resistance to water, seawater and sewage.
  2. Excellent resistance to acids and alkalis.
  3. Tough and hard film with very good adhesion.
  4. Excellent resistance to abrasion.

COLOR: Transparent liquid

1061H HIGH SOLIDS EPOXY COATING

A two-pack, multipurpose high solids coating based on special epoxy resin and hardener with chemical resistance pigment and rust conversion agent for dual-use as a topcoat or primer.

Product Information

USES

Used for the cement products, galvanized steel and the steel structures of bridge, storage tank, pipeline, ship etc.

CHARACTERISTICS

  1. The best green paint, low solvent content and low pollution.
  2. With special resin and rust conversion agent, the wettability of steel surface, and the permeability of corrosive surface, and the adhesion are particularly outstanding.
  3. High solid content, it can be coated in or can be coated with a variety of coatings.
  4. Tough and hard film, excellent abrasion resistance, also suitable as a floor coating.
  5. Excellent resistance to water and sea water, also suitable for tank lining.
  6. Excellent resistance to oils, solvents and chemicals
  7. The power or manual tools can be used to remove the rust in the situation that had no sand blasting equipment.
  8. If want to keep the bright paint film, the recommendation is to coat one layer of PU finish.

FINISH: Semi-gloss

COLOR: Silver or desired colors

1061GF EPOXY HIGH SOLIDS GLASS FLAKE COATING

Do nhựa Epoxy kết hợp chất chống ăn mòn đặc tạo thành sơn vảy thủy tinh thành phần rắn cao.

Product Information

USES

Sơn chống ăn mòn được dùng cho các tàu thuyền, cầu, bồn chứa, đường ống, xưởng hóa chất và các loại kết cấu sắt thép thông dụng

CHARACTERISTICS

  1. 1. Màng sơn dai cứng, đặc biệt có khả năng chịu mài mòn tuyệt vời.
    2. Bền nước, bền ăn mòn rất tốt.
    3. Chứa các chất màu chống ăn mòn thân thiện với môi trường, có đặc tính
    chống ăn mòn và chống ăn mòn tuyệt vời cho thép.
    4. Tính chịu dầu và các hóa chất khác đặc biệt ưu việt
    5. Có thể được sơn dưới nhiều dạng khác nhau là sơn phủ tốt nhất.
    6. Thích hợp sử dụng cho các bề mặt lồi lõm.
    7. Khả năng chống ăn mòn tuyệt vời, khả năng chống ăn mòn tuyệt vời hơnkhi kết hợp với lớp sơn lót PU700 và lớp phủ chống chịu thời tiết cao

COLOR: Màu nâu hoặc màu xám.

1061 HIGH SOLIDS EPOXY COATING

A two-pack, high solids paint based on epoxy resin dual-use as a topcoat or primer.

Product Information

USES

Used for ships, bridges, storage tanks and general steel structures to dual-use as topcoat or primer.

CHARACTERISTICS

  1. Tough and hard film with excellent abrasion resistance.
  2. Excellent water resistance.
  3. With good penetration and inclusive on wet or rust surface of steel.
  4. Excellent resistance to oils and chemicals
  5. Can be coated in or can be coated with a variety of coatings, the best service and green paint.
  6. Suitable used for the cereal tanks.

FINISH: Semi-flat

COLOR: Silver or desired colors

1060 EPOXY MIDDLE COATING

A two-pack, middle paint based on epoxy resin and special hardener with special pigment.

Product Information

USES

Used for steel structures that have been coated with inorganic zinc rich primer, such as steel pipes, steel frame, bridges, plant facilities etc to prevent the blistering, also used for cement wall and cement products.

CHARACTERISTICS

  1. Tough and hard film, rich flexible and adhesion.
  2. Excellent adhesion with inorganic zinc rich primer, it can fill holes on surface of zinc rich paint to prevent topcoat to blistering.
  3. Excellent abrasion resistance and electrical insulation.
  4. Excellent resistance to oils, solvents and chemicals.

FINISH: Flat

COLOR: White, grey, reddish brown